EasyStart T Operating instructions.Comfort Timer with 7-day preset capability.22 1000 32 88 0603.2009
10The following actions are possible:• Switch from temperature display to time and back, press .• Select functions in the menu bar with or
11Activate timer with (see page 7).Select symbol with or .Confirm selection with .Ventilation is switched on.The following actio
12Select symbol with or .Confirm selection with .Ventilation is switched off.Operation and Adjustment Switch off ventilation– only
13Operation and AdjustmentAfter the heater has been switched off in “ventilate” mode, you can immediately switch to “heat” mode using the “heat / vent
14Activate timer with (see page 7).Select symbol with or .Confirm selection with .Add-on unit is switched on.The following acti
15Operation and AdjustmentSelect symbol with or .Confirm selection with .Add-on unit is switched off. Switch off add-on unit– only
16Operation and AdjustmentThe timer can be used to program 3 preset times.The 3 preset times can either all be spread over one weekday or be spread be
17Operation and AdjustmentSelect the required function , or with or and confirm with .Select weekday Mo – Su with or
18Operation and Adjustment Program preset timesDisplay The assigned preset memory locations appear in the display. The next preset memory to be activ
19Operation and AdjustmentThe steps for deleting preset times are the same as for adjusting / setting the preset time, until the current func-tion fla
2ContentsIntroduction• Please read first... 3• Saf
20In water heaters you can choose between the ECO heating level (normal heating) and HIGH (comfort heating).The selected heating level is required to
21Operation and AdjustmentAnzeige im DisplayAir heaters can be individually set to a heating level of 8 to 36 in immediate and preset mode.Heating lev
22What to do if …?Description RemedyA fault occurs in the heater during opera-tion (e.g. fuel shortage or interruption in the diagnostics cable).See h
23What to do if …?If you are unable to remedy the fault or error, please contact an authorised JE workshop or dial the service phone number given on
24ServiceHotlineIf you have any technical question, a problem with your timer or the heater, dial the following service phone number:Telephone hotline
We reserve the right to make changes Printed in Germany © J. Eberspächer GmbH & Co. KGJ. EberspächerGmbH & Co. KGEberspächerstraße 24D
3Safety informationDanger!– All information and notes, in particular the safety information in the heater’s technical description must be observed at
4TimerThe timer can be used to make the settings and adjustments necessary for operation of the heater and to switch vari-ous units on and off. Contro
5OverviewDisplaysMenu bar Heater ON / OFF Ventilation ON / OFF Add-on unit ON / OFF Program preset time Set the time / operating time Set hea
6Flashing symbolsEach flashing symbol in the menu, program and display bar can be changed with or and confirmed with .Operation and Adjust
7Activate timerDisplay press until the menu bar appears in the display and the temperature is displayed. The timer is activated.• Possible displays
8Operation and Adjustment Set weekday, time and operating timeActivate timer with (see page 7).Select symbol with or .Confirm sele
9The following actions are possible:• Call up display. press, the current heating level is displayed (for air heaters only) press to display the t
Comments to this Manuals